Guide Categories:  Drivers | Questions & Answers | Write to Us
Technical Questions and Answers Silicon Guide
Search SiliconGuide:
Silicon Guide Technical Questions and Answers Browse Forum Index
Cully

12/25/2001
18:06:42
Cd writer installation

Hi, i recently purchased a yamaha Internal cd writer, to install in to my HP Pavillion. I followed all the directions step by step, but when i got the case and the faceplate off the front of the computer, the extra bay is not big enough for the writer to fit in to. There is a physical size limitation, the bay would be big enough, but there are steel "support" type things on the one side of the bay. they take up to much room, and the drive wont fit in at all. What is wrong?? Any help would be greatly appreciated. Thank you very much in advance.


AMR

6/16/2003
11:02:25
RE: Cd writer installation

HI SIR
PLZ I WANT ANY ALTERNATIVE FOR SOFTWARE DISC 1 FOR MY HP CD-WRITER 9100
THANKS
AMR



Aq

12/20/2003
04:50:58
RE: Cd writer installation

Hello, i have an iomega internal cd writer and i want to install it to my computer. I followed all the steps to install the cd writer but i found out that the IDE connection ports are already being used by a floppy drive, hard drive and CD-ROM drive and there`s no other vacant port to install the cd writer onto the mother board. What should i do?. Thanks.


Loren

9/15/2004
13:26:32
RE: Cd writer installation

I installed a CD writer in my computer. I know that at least the power cable is connected correctly because the drive opens and closes and I think the ribbon is correct also. When I turn on the computer though it does not recognize the burner. Is there a setting in the bios or somewhere else which I need to change? Any help would be greatly appreciated.

thanks


Tony Lazowski

4/26/2005
13:04:53
RE: Cd writer installation

Somebody else installed my cd reader and cd writer. I have 2 questions. They hooked my cd reader and cd writer up as master and slave. Does this cause a timing problem when copying cd's? Off hand, I don't know which is master or slave.

My speakers work with system generated sounds but my cd's do not make a sound. How do I find the sound board so I can hookup to it?


bryan

6/24/2005
02:26:08
RE: Cd writer installation

i have problem in installing the cd writer pls give a graphical steps how to manage or to put the cd writer on my computer coz this is my first time to install an internal cd writer.....


nadim

7/14/2005
14:13:00
RE: Cd writer installation

i have a problem in installing cd writer please write me how do i instal it because it is too importent to instal in my pc


Manikyala Rao

8/04/2005
04:29:14
RE: Cd writer installation

I have PC with power DVD (read only)and working well.Recently I purchased CD writer and fixed it. Selection is also made as master and slve for POwer DVD and CD writer respectively. But I am not able to install the CD writer set up programme.After completing certain installation Iam getting an error message and further installation is not taking place.Now I am not able to use the CD writer purchased.With fixing of CD writer my computer developed a new problem that whenever CD is put on either power DVD or newly purchased CD the computer is giving an error message and able to continue further after re start of the computer only.When computer is restarted with CD in the drive then I am able to read the CD.The operating system is windows 98/windows millenium. Please advise me to rectify the problem


Md. Munir Hossain

9/22/2005
06:38:04
RE: Cd writer installation

Sent massage


denise carpenter

11/29/2005
20:56:59
cd lnstallation

i want to install microsoft streets and tips off the two cd"s i have whats wrong it won"t do it


Donclinton

3/23/2006
08:18:54
RE: Cd writer installation

Hi Sir .plz i bought a new CD-Writer, plz how can i install it?


rajmurugan

5/17/2006
05:08:56
Cd installation

i am having a system
mother borad is gigabyte
processor is amd sampron
in my system already samsung cd writter installed. Now i want to install Cd or dvd
Plese help me install.



omar

7/22/2006
08:50:39
RE: Cd writer installation

thanks


juber

9/02/2006
02:08:07
RE: Cd writer installation

I have already install CD writer in my system, now i want install in my other system for temporary purpose, so may i do any changes in software to take effect?

please give me reply.

thankyou


deepak

10/18/2006
03:36:35
RE: Cd writer installation

set up


nigel

10/18/2006
11:06:06
RE: Cd writer installation

i have just installed a sony cd-rw crx320ee on a HP pavilion t340 running windows xp windows sees it load driver and it powers up ok you put a cd in and you get the quick show of the cd plus disk but when you try to access it the drive shows as empty you cannot read or write to it


ARSHITA

1/16/2007
02:16:15
RE: Cd writer installation

sir ,i had cd writer h/w .....bt i can't copy or write in cd...plzzz...help me


Nazir

6/21/2007
16:11:45
computer upgrade

I have a computer using windows 98 with a cd writer but, I want to take the writer out and install it to another computer using windows professional. Can this be done? If so can you kindly send me the steps on how I can do this please.

From
Nazir


evolme

11/17/2007
14:43:57
RE: Cd writer installation

I got my computer reformated. the person who did it forgot to set the pc to recgnize that it has a dvd/cd writer. Do you guys know any website where I can get a free download for it. it won't read any of my discs =(


Ed Wise

1/01/2008
13:01:23
RE: Cd writer installation

I had a DVD writer that was not working, so I installed another cd writer. I have 2 cd writers and I unhooked the 1st one and then I have connected them both. I can get them to open their doors, but my computer does not reconize that they are installed. What do I have to do to correct this


sridevi

4/09/2008
10:35:11
RE: Cd writer installation

i am having cd writer installation cd ,i installed but it's not working how to activate that


kalpana

10/01/2008
02:07:02
RE: Cd writer installation

i backup my programs using cd-drivers but i don't no how to install
David

7/10/2009
07:57:23
RE: Cd writer installation

I installed a CD writer in my computer. I know that at least the power cable is connected correctly because the drive opens and closes and I think the ribbon is correct also. When I turn on the computer though it does not recognize the burner. Is there a setting in the bios or somewhere else which I need to change? Any help would be greatly appreciated.
jacky

12/29/2009
08:21:48
RE: Cd writer installation

how to install cd/dvd-writer please give us step by step detail..
expected immediate reaction
Page 1


Add a Message (No Sign-Up Required)
Name:
Subject:
Message:
Verification:

Reload Image

Enter the code here:

Search All Questions and Answers
Didn't find what you were looking for on this page?
Try Searching All Forum Topics for Your Answer Right Here 

Find:   

Still Can't Find It?
Start a new thread about your topic!
Copyright © 1999 - 2009 SiliconPharm Corporation, All Rights Reserved