Guides:  Drivers | Questions & Answers | Software | Write to Us
Technical Questions and Answers Silicon Guide
Search SiliconGuide:

Upgrading CD-RW firmware

Questions & Answers > Device Drivers
Darighaz on October 25, 2003
Upgrading CD-RW firmware

I have a gateway made CD-RW drive and want to upgrade the firm ware for it but they dont list it as having any new drivers. HOWEVER! The name of my CD drive is HL-DT-ST CD-RW GCE-8160b which is typically a LGE made part. Is it safe to use the LGE drivers or no?
Mar Ten on December 14, 2003
RE: Upgrading CD-RW firmware

Hi,
I would like to upgrade firmware for CD/RW Model: LGE product HL-DT-ST RW/DVD GCC-4408B.

Please help me find the latest upgrade for it

Best regards,
Mar Ten
Raptor 40 on September 6, 2004
RE: Upgrading CD-RW firmware

http://us.lgservice.com/jsp/common/download.jsp?DOC_ID=KRSWL000012484&FILE_NAME=KRSWL000012484-b1-a1.exe&ORIGINAL_NAME_b1_a1=GCE8160BFirm201.exe&FILE_GUBUN=B
Erick on February 5, 2005
RE: Upgrading CD-RW firmware

i would like to do upgrade firmware for CD/RW Model: LGE product HL-DT-ST RW/DVD GCC-4408B.
vinod on May 5, 2006
RE: Upgrading CD-RW firmware

pls send upgrading firware cd rw sony
Zues on May 19, 2006
RE: Upgrading CD-RW firmware for LGE

IMPORTANT: do not interfere with the drive during the firmware update. If an error occurs during the upgrade process, or the upgrade process is cancelled during this process, damage to the drive can occur. If you experience any problems or have any questions, please contact our LG customer support line toll-free at 1-800-243-0000.

Firmware updates are posted in the device driver section. Visit us.lgservice.com and click the device driver icon in the middle of the page. Firmware software for newer drives works in windows mode with Windows 98/ME/2000/XP. If the file you downloaded contains an executable and a file with a “.lge” extension, this firmware should be run in MS-DOS.

Before updating the firmware, Remove any disks from the drive and connect the drive to the secondary IDE channel as a master drive with no other devices connected to that channel. Warning: If you have two optical drives on the same channel it may try to update both of them and erase or damage the firmware in each one.

For the Windows versions of the firmware software:
Start Windows and verify it can recognize the drive.

Execute the firmware program. If the current firmware version is a lower number than the new version, the Update button should be green. If it's red, the program cannot communicate with your drive or your drive has the current firmware revision.

Click the update button. When the upgrade is complete the screen should say FIRMWARE UPDATE SUCCESSFUL. Restart the computer.

For the MS-DOS versions of the firmware software:
Start the computer using a Windows startup disk. (You can download boot disks from the Internet at places like bootdisk.com). Type in the name of the executable file followed by the lge firmware file (without the file extensions attached). For example, jv2 jv2lglx52. Restart the computer when done.
maycon on July 28, 2008
RE: Upgrading CD-RW firmware

asaa
will on August 17, 2009
driver for gcc-4408b cd rom

do anyone have this driver or know where to download the driver?
Provide an Answer
Name
Answer

Reload Image

Enter the code displayed above here:
 

Didn't find what you were looking for on this page?
Browse all Device Drivers related questions
Browse all Questions and Answers
Copyright © 1999 - 2016 SiliconPharm Corporation, All Rights Reserved