 | Todd on March 12, 2002 | nero software
I am trying to burn a power point on cd-r. the power point includes text, jpg's and wav files. it burns successfully but when i try to open it, it will not respond. it will open pwr pnt but will never open the presentation itself. what am i doing wrong? |
|
 | Michael J. Scheraldi on June 22, 2002 | RE: nero software
When I burn a compilation cd everything appears to be working properly, but I cannot hear anything when I play it back. It show the amount of tracks that I have played but there is no sound. I do not have this problem when I copy a disk only when I make a compilation. I have made a couple of compilation disks in the past so I believe I am doing it properly.You should also know that I have tried to playback on more than one player. I am perplexed. Is there a manual I can access to make sure I am following the right procedure? I am following the wizard. |
|
| BKG on February 4, 2003 | RE: nero software installation
When I try to install Nero 5.5.10 on my computer I get the following message:
"The installation has detected that some of your systemfiles are outdated. In order to update these files the installation has to reboot your computer. The installation will continue after the reboot."
After I reboot I get the following message:
"The installation couldn't update your system files please get the latest updates for your operating system from Microsoft and afterward retry to install Nero-Burning Rom."
I have downloaded and installed all of the updates (critical and non-critical) for Windows 98 (my operating system) from the Microsoft web-site.
Can someone PLEASE help me install this software.
Thank you |
|
| mike on February 5, 2003 | RE: nero software
i'm trying to install nero 5.5 that came with my cd rewriter and i keep get a message that reads error 1305 error reading from file E:\nero55\nero\cdrom.cfg can someone help me please thanks mike |
|
| terry on February 27, 2003 | RE: nero software
i have upgraded my windows from windows me to windows xp and my burner want work right it like burns all the tracks but when u play the cd it starts out on track 4 but when i had me windows it didnt do that it worked properly and my burner is compatible with xp so what do i do to get it to work right |
|
| mcroft on March 19, 2003 | RE: nero software
Hi, have same problem as BKG, dated 2/04/2003
14:30:39
Any hints as to where I can rectify this problem.
Thanks in advance |
|
| J on March 24, 2003 | RE: error 1305
I get the same problem as Mike mentioned. I have a CD-RW drive by I/O Magic and it came with this Nero Software. It always says upon installation:
"Error 1305. Error reading from file E:\NERO55\NERO\CDROM.cfg. Verify that the file exists and that you can access it."
It's really annoying. Someone please help! I may end up just downloading some software if this crappy CD won't work. |
|
| Srinivas on March 24, 2003 | RE: nero software
Hi,
I am trying to burn a video cd, I am getting the following error:
The file birthday.mpg is not valid file for creating a standard video CD V2.0(CD-I player)disc. A compliant video file requires the following specifications.
MPEG-1 which was encoded for Video-CD:
audio: 44.1 kHz; stereo; 224 Kbit/s
video:352*240/29.97 Hz or 352*240/23.96 Hz or 352*288/25 Hz
The following problems were found:
-Stream encoding which is invalid for a (super) video-CD
-Invalid stream 29.97 frames/second, 320*240 Pixels
How would you like to continue?
Turn off standard compliance and continue?
Re-encode the video file
Cancel |
|
| jazz on April 21, 2003 | RE: nero software
Hi, I am using version 4 to burn vcd.
Whether I am copy to disk or compilation cd.
everything seems to be fine. Until the last part.
Invalid parameter. Simulation failed at 12X.
Somehow, some files had been copy into the CDR.
when I try to open up the CDR, the pc is either hangs up or crash.
Anyone can help. |
|
| Noell on May 31, 2003 | RE: nero software
I also received the following error message while trying to install Nero 5.5 software: "Error 1305. Eror reading from file e:\nero\nero55\nero\cdrom.cfg. Verify that the file exists and you can access it." When I open the cdrom.cfg file from the CD, it's empty. Please Help! |
|
| Henrique on June 1, 2003 | RE: nero software
In DOS mode copy a newer version of the file msvcrt.dll (6.10.8924.0) into your "windows\system" directory. |
|
| Noell on June 2, 2003 | RE: nero software
Henrique: where do I look to find a newer version of the file msvcrt.dll (6.10.8924.0)? What does this file do? |
|
| Jeff on July 17, 2003 | RE: nero software
Check this link out I think it'll help. 1305 just means it can't read from the CD |
|
| Jeff on July 17, 2003 | RE: nero software
Here's the Link
http://support.microsoft.com/default.aspx?scid=KB;en-us;q248263 |
|
| Robert Hodorog on August 2, 2003 | RE: nero software
I installed successfully Nero 5.5.8.0 on
my computer and I have a TEAC 52X (WSEE ?)
CD-rewriter unit. I can use my unit as
CD-ROM,but Nero can't recognise it as CD-Recorder.
I looked for CDROM.CFG on yours Web site for
download,but I can't find it.
Please help me ! |
|
| Steve on September 14, 2003 | RE: nero software error1305
Hi.
I just got my cd burner and tried to install the Nero software that came with. I also received the cdrom.cfg error. I was finally able to fix this by disabling my primary cdrom player(secondary being my cd writer). I disabled it by removing it physically from my laptop. Now that I have nero installed, I'm having problems burning audio cds but that is another story. |
|
| Robert Hodorog on September 22, 2003 | RE: nero software
My CD-Writer unit,TEAC 52X (552E) is detected by Windows as CR-ROM unit,not as CD-Writer unit.This happen even I remove it from Device Manager and restart my computer.
The TEAC corporation (?) has no available driver for download for this CD-Writer type.
What can I do ? Pleas help me ! |
|
| Robert Hodorog on September 22, 2003 | RE: nero software
Reffering on my last e-mail,I must complete it. The TEAC 52X CD-Writer is the unique CD-Writer/CD-ROM unit on my computer.
My CD-Writer unit,TEAC 52X (552E) is detected by Windows as CR-ROM unit,not as CD-Writer unit.This happen even I remove it from Device Manager and restart my computer.
The TEAC corporation (?) has no available driver for download for this CD-Writer type.
What can I do ? Please help me !
Thank you ! |
|
| Robert Hodorog on September 22, 2003 | RE: nero software
The operating system is Windows 98 Second Edition. |
|
| Haraga Stefan on November 14, 2003 | RE: nero software
My CD-Writer unit,TEAC 52X (552E) is detected by Windows as CR-ROM unit,not as CD-Writer unit.Only win xp is detected as a cd writer.please answer andtell me what can I do to make the CD-Writer be useful.if it`s from the driver where can I download for free this driver.Thank you. |
|
| Arto Jaaskelainen on November 19, 2003 | RE: nero software
Ref.: Win98 and Error 1305
Hi,
Surprised to see that many messages asking about "Error 1305. Error reading file". I think most common reason for that may be a DOS CD ROM driver in CONFIG.SYS . Comment it away with a semicolon i.e. something like this
;device=c:\windows\command\ebd\oakcdrom.sys /D:cdrom
--- and surprise: no errors any more... ;-)
Works with Nero and many others.
Regards
Arto
(I'm one of tech sup guys at Tieto-X, Finland) |
|
| Joe on November 26, 2003 | RE: nero software
I am getting an error when I try to install nero 5 that I got with my burner. It is on a Windows 98 system. Error: 1605 Unable to install InstallShield script runtime
What can I do to fix this? |
|
| studioman on December 5, 2003 | RE: nero software
Hi
In reply to Art's answer,could he be more specific on carring out his idea as I have the same problem but I am not a tech head.
Regards
Studioman |
|
| Nathan Smith on December 5, 2003 | RE: nero software
Hi i am trying to install Nero 6 Ultra Edition i have windows xp. The error message says " Error During Installation Of Componet "AIFF Audioplugin". Can anyone help?
Regards
Nathan |
|
| sunilpatel on December 10, 2003 | RE: nero software
cannot get cd key sony nero5 burning rom oem version5.5 |
|
| sunilpatel on December 10, 2003 | RE: nero software
i want a cd key sony nero5 burning rom oem version5.5 |
|
| sanju on December 10, 2003 | RE: nero software
respected sir ,,
will u plz help me for nero software5.5 ,if it is possible free software to me , waiting for nero5.5 , send me as early as possible.
thanking you,
sanjay ghangale |
|
| Felisha on December 20, 2003 | Nero software
Hello i am trying to burn a cd-r and everything goes well until i get to the actual burning processnothing burns it says that i need to download "nero burnrights" but what i wanna know is where do i download the burnrights from?? If you know please let me know thank u. |
|
| Tim Cregan on December 28, 2003 | RE: nero software
I like the look of Art's answer - seems so simple and I keep getting the 1305 error too - but I'm no techie either and although I tried to follow his instructions I couldn't get anything to work. This is what's written in my CONFIG.SYS file. How would i need to change it Art?
DEVICE=C:\WINDOWS\HIMEM.SYS
DEVICE=C:\WINDOWS\EMM386.EXE
DEVICE=CDTECH.SYS /D:CDROM
Thanks in advance,\
Tim |
|
| greg on January 11, 2004 | RE: nero software
does any one know the proper procedure for burning downloaded karaoke on nero 5.5 thanks |
|
| Emma on January 17, 2004 | RE: nero software
Hi. I've bought a DVD burner to replace my CD burner, and a copy of Nero came with both drives. I've tried installing the Nero that came with the DVD drive, and it gets to the "cover designer" install, and it fails every time. I was since told to uninstall my version of Nero that came with the CD burner, and I did it through the 'add/remove programs' thing. Now it seems that I can't completely uninstall the older Nero, as the new installation keeps failing. I ran that 'runedit' thing, and it found a file when I searched for 'Nero'. Only problem is, it won't let me delete it. Sometimes when i turn the computer on, the 'Ahead' file with all the Nero stuff in it is back in my program files. Please help! I'm so frustrated. Nothing I do seems to get rid of the old Nero, and until I delete it, I can't install the new one. And, of course, the old Nero won't work with the new drive, so for the time being, I can't burn a thing... |
|
| |
| Sam Harris on March 15, 2004 | RE: nero software
Can I record LPs to a file and then burn a CD of that file with this software? |
|
| K.C. on March 16, 2004 | RE: nero software
Lost the serial number needed to install Nero. What can I do? |
|
| Pavel Foltin on July 1, 2004 | RE: nero software
Dear friends,
I have the same problem as a Robert Hodorog (date 9/22/2003)and Haraga Stefan (date 11/14/2003). I have same CD-RW, but Windows Me.
Thanks for Your help. |
|
| mos on July 13, 2004 | RE: nero software
hello there
i need your help i have got nero on my computer. it was installed on my computer. when i try to go to it in say serial no but i don't know what to put there. please help me.
thanks |
|
| Rit on September 27, 2004 | RE: nero software
hi!
I'm trying to burn a vcd and am getting an error:
The file rit.mpg is not a valid file for creating a standard video CD V2.0(CD-I player)disc. A compliant video file requires the following specifications.
MPEG-1 which was encoded for Video-CD:
audio: 44.1 kHz; stereo; 224 Kbit/s
video:352x240/29.97 Hz or 352x240/23.976 Hz or 352x288/25 Hz
The following problems were found:
-Stream encoding which is invalid for a (super) video-CD
-etc....
any suggestions?
pls. reply
thanks! |
|
| mark on October 18, 2004 | RE: nero software
Hi i am also trying to install Nero 6 Ultra Edition i have windows xp. The error message says " Error During Installation Of Componet "AIFF Audioplugin". Can anyone help? it would be GREATLY appreciated! |
|
| Anna on December 23, 2004 | RE: nero software
I am having problems with Nero 5. I am trying to burn a VCD and it gets stuck at 8% of the encoding to video process and just freezes up. What's going on? |
|
| elias on January 6, 2005 | RE: nero software
hello
can any one help< i have anero 5.5< it works good < but it did not acceptfles such microsoft word< can any one help me to solve this problem>
thanks for help
elias |
|
| elias on January 6, 2005 | RE: nero software
hello ..emma
you asked how to uninstall the old one of nero and install it again< so you can make the following steps:
turn your computer on and press at f8 0r (add &remove programs) choose to remove nero < by click at the program from there
it will be removed
it simply way < but because you dont know the way you feel its difficult>
good time < elias |
|
| mark on February 11, 2005 | RE: nero software
hey does anyone know the serail number for a nero 5 burning rom????? if so can ya send me a email of what it is plz
thanx |
|
| pureone on February 12, 2005 | RE: nero software
the page to remove nero is no longer up!!!
i use this software on a friends computer a few weeks ago(winme) and it worked now the link is down!!! i need a version of the remove nero software. |
|
| bosswin on March 2, 2005 | RE: nero software
hello ..emma
you asked how to uninstall the old one of nero and install it again< so you can make the following steps:
turn your computer on and press at f8 go to program (add and remove soft ware
0r (add &remove programs) choose to remove nero < by click at the program from there
it will be removed |
|
| Monica on June 1, 2005 | RE: nero software
I am trying to burn a video cd, I am getting the following error:
The file birthday.mpg is not valid file for creating a standard video CD V2.0(CD-I player)disc. A compliant video file requires the following specifications.
MPEG-1 which was encoded for Video-CD:
audio: 44.1 kHz; stereo; 224 Kbit/s
video:352*240/29.97 Hz or 352*240/23.96 Hz or 352*288/25 Hz
The following problems were found:
-Stream encoding which is invalid for a (super) video-CD
-Invalid stream 29.97 frames/second, 320*240 Pixels
i'd appreaciate anyone who could help. |
|
| Dennis Justice on June 18, 2005 | RE: nero software
my nero5 install cd disk is broken,can anyone
email me with ainstall attchment.thanks |
|
| Cat on July 4, 2005 | RE: nero software
I installed my Nero hardware and downloaded the software onto my XP, I go all the way through the burning process and when I get to the last step where it says burn it comes up with the message there is no cd in the divice. Please put in CD.
What am I doing wrong? I have tried all day and am so frustrated. This is not how I thought I would spend my 4th of July. Help me please.I have limited computer skills.
Thanks,
Cat |
|
| josh on August 24, 2007 | RE: nero software
Can anybody please help me out? I have a hitachi LG cd-rw gce-81608 and i can not find a working burning software that goes with it. |
|
| Ed Hall on September 14, 2009 | RE: nero software
Using Windows MT. I'm trying to burn a floppy disk of Word Perfect(AscII format) material from my A drive to my external I/O Magic CD reader/ writer using Nero 5.5. Clicking on burn disk from the Nero Express menue works OK. BUT the Image Reader from which I want to copy has a source already entered which I believe is a CD drive letter that I can't delete to enter the A drive as my source.
How do I clear my Nero source window so I can enter the source as my A drive. I have the same problen trying to use my C drive or Zip drive to read a whole disk or for that matter just some of the files from the source disc. |
|
| Provide an Answer |