| Ryan on July 21, 2002 | THE ANSWER
Hello...
I did find out how... you actually don't have to pay for the drivers. They sell the drivers on a cd for people who don't have internet access.
Here's how I did it,
when I tried to install it, setup told me that It could not find my cd-writer and asked me if I wanted to install anyway. I agreed and installed it and when it was done I restarted my computer.
I then went to: http://roxio.com/en/support/roxio_support/ecdc/ecdc_plat_51dl_t2.jhtml
and installed the upgrade.. IT WORKED!!!!! the only bad thing is that it will get rid of your "Take Two" but that was made for Windows 95 anyway.
Well I hope this helps =). |
|
| Ryan on July 21, 2002 | THE ANSWER - P.S.
The above message pertains to Windows XP Home/Professional. I have a 9100i and diden't need the hp drivers after the xp upgrade. The Hp cd-writer drivers have nothing to do with the installation problem with Roxio Easy Cd Creator 5 /platinum.
If you are using windows 98 and are needing the drivers for you 9100i.. mabe I can arrange something.
Good Luck!!! |
|
| stewart on August 5, 2002 | Help
Hope you can help me with my problem as it is driving me nuts. I bought the HP 8200e a few years ago whilst living in England (I now live in Australia). At first, it seemed to work just fine however I have found that I have been having sporadic problems with it over the last couple of years. The problem occurs when I try to write an audio CD from wav files on the hard drive using Easy CD Creator.
Usually, I drag and drop the files I want to burn and select "Create CD" from the File Menu, having already inserted a blank CD, and configure as I want it. However, upon beginning writing, the program comes up with the usual "Writing TOC" message before quickly closing and informing me the CD has been written successfully. Of course, it has not. When I try to eject the CD, I now find that the drive seems to be locked. Whenever I push the eject button, I get a red light. Upon entering the Direct CD application to attempt to eject the disc this way, it tells me the "Device is not ready". Rebooting does not help and the only way to get the drive to open or be accessible s to pull out and re-insert the power cord.
In addition, the computer has recently displayed problems in booting when the CD Writer is not plugged in. It will display a "Windows Protection Error" screen upon booting and will only function normally when the CD Writer is plugged into the USB port.
I am using the software and drivers that came with the Writer when I purchased it originally. The only other anomally I have recognised is the computer automatically detects two HP Mass Storage Devices (?) in the Device Manager (one always has a exclamation mark next to it). When I delete one, the computer simply re-installs it on boot-up. There is also a Wave Device for Modem which gets continually detected, but I assume this to be irrelevant.
Can anyone help me as this is starting to lay waste to all my blank CD-Rs and is costing me hair. |
|
| dreampursuer on August 12, 2002 | RE: CD Writer installation
www.hp.com/go/cdr |
|
| josé ignacio on August 21, 2002 | CD Writer installation
Message:
hello:
i need drivers for my cd-writer plus 8200e Series for Windows 2000 professional.
thanks |
|
| Kathy on September 29, 2002 | 8200e driving me crazy!!!!
This friend of mine was leaving the country, adn gave me his HP CD Writer (8200e) as a gift. I tried installing it into the computer but then I realised he didn't give me any CDs/Floppy with the machine.... I've downloaded the DLA and RecordNow software from HP's site but it still doesn't work -- every time i try to write a disk it's unsucessful. When I installed the USB driver to the computer it asked me for a CD labelled 'Software Disc 1'...I guess that must have been the CD that I need. Can anyone help????? Where can I get hold of a copy??????
thanks so much!!!!!!!!!! |
|
| Chris W. on September 29, 2002 | THE ANSWER - P.S.
Hi Kathy,
I'm not sure what the answer is but I went to a computer fair today and I've got an email address of a guy that was on one of the computer stalls. He should be able to help you.
chrisscomputers@hotmail.com |
|
| Kathy on September 30, 2002 | THE ANSWER - P.S.
Hi Chris,
Thanks for your help, I will email this guy today. thanks so much!!!
Kathy |
|
| largerichard22 on December 24, 2002 | THE ANSWER - P.S.
i had my comp cleaned out and my cd burner needs to be reinstalled but i need a disc to enter it. i bought it at sears hp cd-writer 9150i thats what the box says. now the cd burner says 9100 series any help would be appreciated |
|
| steven corse on January 2, 2003 | help me please
i have a computer with two hard drives connected to the primary IDE controller they are set as master and slave and on the second IDE controller i have a DVD drive and a CD ROM also set as master and slave how can i fit a CD writerto my computer |
|
| Eric Georgieff on January 2, 2003 | THE ANSWER - P.S.
Steven Corse,
Since the vast majority of conventional computers only support up to four IDE devices (using 2 IDE controllers) you will have to remove one device as you have reached the maximum for your system. I suggest you remove your CD-Rom drive since your CD-Writer can act as a superior CD-Rom drive capable of reading both conventional CDs and CD rewritable discs.
If you wish to keep all of the drives you currently own, and you still have at least one 5.25 inch wide drive bay remaining in your system's case, it may be possible to add an extra IDE device by installing a PCI IDE controller card.
Eric Georgieff |
|
| Jono on February 22, 2003 | cd-writer plus 9100
i've come to this problem! the 9100 can't burn [dao/sao + sub]. then i got to hp and there was a firmware update available but it only work for 98 nt4 95, so i use xp! is there any way to update the firmware in xp ? i won't format just for the firmware update!! is p tha low level manufacter ?? if anyone can help i give my thanks in advance!
thanks |
|
| Darrell on April 24, 2003 | Question
i had my main drive changed i had a cd burner how do i re-install it to the new computer box |
|
| lilia on June 10, 2003 | drivers for cd-writer plus 8200 series
I need drivers for my cd-writer plus 8200 Series for Windows 98. |
|
| AMR on June 16, 2003 | THE ANSWER - P.S.
HI SIR
I HAVE HP CD-WRITER 9100 AND I MAKE FORMATE FOR MY COMPUTER SO WHEN I OPEN THE PROGRAMME OF HP CD-WRITER IT ASKS ME FOR SOFT WARE DISC 1 AND I DO NOT HAVE IT SO HELP ME PLEASE
AMR |
|
| Isachi on July 1, 2003 | THE ANSWER - P.S.
I have been trying to copy from my hard disk to a floppy disc or cd but the computer shows a message that the disc has writer protection.What should I do???? |
|
| stephen on July 3, 2003 | Need hp cd writer 8200 hardware
i need help i just moved and couldnt find the software disk 1 or the floppy to install the cd burner into my new computer could someone please help me to find out where to get these files |
|
| R. S. GILL on November 21, 2003 | Driver for hp cd-writer 9100 series
Please arrange the drivers for Windows-98 and Windows-2000 Pro if possible
Thanks
R. S. Gill |
|
| R. Murphy on December 21, 2003 | THE ANSWER - P.S.
I obtained my Hp cd
writer 8200e series a couple of years ago. I lost the installation instructions. If there is any way you can send or email me the instructions, would you be so kind as to do so!
Thank you so much ! |
|
| josef on January 7, 2004 | THE ANSWER - P.S.
i need a driver fo cd writer 9100 series please
thank you |
|
| Patty on January 8, 2004 | THE ANSWER - P.S.
I need a driver compatible with xp for hp cd-writer 9100 series. can you help? |
|
| washington on January 13, 2004 | DRIVERS
Please need drivers for cd writer 8200e
please is urgent |
|
| cdf on February 25, 2004 | THE ANSWER - P.S.
hp 8200 plus cd-writer wýndows 2000 driver |
|
| vipen on March 18, 2004 | THE ANSWER - P.S.
i want to cd writer software for hp cd-writer 9100 series |
|
| Shahid Raza on May 26, 2004 | Driver HP CD writer plus 8200 serier xp compatable
Dear Sir,
four years back we have purchased an external cd writer with win98 compatable driver, now we want to install win xp operating system,
Therefore, you are hereby requested to kindly send the driver for the aforsaid operating system or guide me to download from your specified site.
Thanking you,
For Life 'n' Style
Shahid Raza |
|
| Louie Laforteza on June 3, 2004 | THE ANSWER - P.S.
anyone who need my help youre very much welcome. As for info: driver for HP cd-writer plus 8200 series for use in win98 and for use in winxp or win2000 is different and even the software to use to recognized that cd-writer. e.g. in win98 it using the easy cd creator but in winxp or win2000 it uses the record now software.
If someone need my help and any driver for this device just email me so that i can send it to u.
Hope to help u even in a small way.
God bless.
Louie |
|
| baluguanche on June 8, 2004 | Driver for hp cd-writer 9100 series
I need a driver compatible with 2000pro for hp cd-writer 9100 series. can you help?
if anyone can help i give my thanks in advance!
thanks |
|
| medhat on June 26, 2004 | THE ANSWER - P.S.
i need learning formate win xp |
|
| tigi on July 14, 2004 | THE ANSWER - P.S.
i have a problem i'm creating a e-mail website using php and i need the button 'send' to send emails. for my database im using mysql how do i go about this. |
|
| Stacy on July 19, 2004 | HP 8200e & Windows XP
Hello...:)
I received an HP Cd-writer 8200 for my birthday a few years ago and it worked well with the computer I had. I recently purchased a new computer and went to download the installation floppy to install the CD writer on my new computer (I had forgotten the installation was a floppy disk). My new Dell computer has no floppy drive. Is there a website where you can download the installation?
Thanks! :) |
|
| Paul on August 28, 2004 | THE ANSWER - P.S.
I upgraded to Windows XP, but my HP-CD Writer 9100 doesn't recognize a CD I burned while still using Windows ME. I tried to reload the HP software, and now I get that the "Install Assistant couldn't find a suitable IDE Controller" Any clue where to go at this point? |
|
| Cabbage on September 19, 2004 | THE ANSWER - P.S.
i have lost my cd to memorex cd creator 3 and i cant find it anywhere and i wont be able to set it up and i cant afford to buy it again is there any other way of setting it up.
thanks |
|
| lolo on November 19, 2004 | THE ANSWER - P.S.
i got solution for XP recognize
go to:
http://h10025.www1.hp.com/ewfrf/wc/softwareList?product=60458&lang=en&cc=us&lc=en&dlc=en&os=228
choose the driver
and the sofware 5.78Mo |
|
| pat on December 7, 2004 | THE ANSWER - P.S.
I'v lost my installation disc for my HP 9100 cd burner, is there any way to get the installation disc.
Thanks |
|
| Lee on January 10, 2005 | THE ANSWER - P.S.
I need a power cord and software for Hewlett Packard c d writer plus 8200 series |
|
| Ana on January 23, 2005 | Need driver for cd-writer...
I am running windows 98, and need the drivers contained on the floppy disk for hp cd-writer 8220e cos my one is badly damaged...am at my wits end someone PLZ HELP!!!!!! |
|
| mahendar naidu on April 15, 2005 | THE ANSWER - P.S.
i upgrade my operating system to windows professional xp version. i have hp cd-writer 9100 series[c4459c], this is not working in xp operating system. i get one message when i try to use hp cd-writer that is [the application failed to initialize properly(0Xc0000142) click on ok to terminate the application]. how can i solve my problem. please give me your valuable suggestion. |
|
| Anonymous on April 28, 2005 | THE ANSWER - P.S.
When my computer turns on the light near the ejection button is orange, and everyime I get on RecordNow it goes to 15 percent and stops and goes to 100 percent and said it was unsucessful. What should I do? Should I add hardware get new CDs or clean out the drive again! Please somebody help me! Its very much appreciated. Thank you!! |
|
| ashwin.i on May 12, 2005 | THE ANSWER - P.S.
how to install software packages of a cd writer when installing for first time |
|
| victoria etherington on May 14, 2005 | can any onr help
i have tried to install a samsung ts-h492 cd rewriter on windows 98. i cannot get any further than turning the computer on as it crashes when i get past the set up dialogue. i'm not very computer minded but i knoe that i have installed all the correct leads and power supplies but i'm still having no joy.
please help |
|
| karen on June 30, 2005 | THE ANSWER - P.S.
how can i get my cd to eject |
|
| RONALD on July 13, 2005 | THE ANSWER - P.S.
need drivers for my cd-writer plus 8200 Series for Windows 2000 professional.
thanks |
|
| Andrés on August 12, 2005 | CD-Writer 9100 Series
Hi! I have a HP cd-writer 9100 series. My problem is, when I insert a cd (in blank or burned ) I have to reset my computer because my Windows XP Pro crash
Please y Need Help !!! |
|
| shell on August 23, 2005 | THE ANSWER - P.S.
I lost my installation disc for my hp cd-writer 8200 series. Please help |
|
| Roberto on August 23, 2005 | THE ANSWER - P.S.
For all the folks not having the hp drivers; just visit www.hp.com. Some are in there but some are not. In that case you just can look them up in driversguide.com or cdrom-drivers.com. Now the real problem is putting some drives to work with Windows 2000 pro. Thats my case. I have a 8220e external cd-writer and this drive just wont install but as a normal drive, given that Win2k kicks the original drivers out and from the boot assigns generic drivers like cdrom.sys, thereby handling the unit just like another cdrom reader. If someone knows a way around this issue itd have to be a winner, because people from hp just dont get the right answer. Maybe its the Service Pack 4, or maybe I have to do a clean install for the Win2k because I installed it just over Win98; but everything looked so right before this issue that I want to resist the idea of formatting. Any Ideas? |
|
| manu on December 15, 2005 | THE ANSWER - P.S.
Hi, I have a cd writer 9100 series but i have xp that i have put it into so it is not working at all and when i try to access music it says it cannot find Cd Writer??? Can you help?? |
|
| ashra on April 26, 2006 | roxio help
help plezzzz iv got roxio dvd/rw and iv lost the disk to install it could any plezzz help me
thanx |
|
| |
| Provide an Answer |